PadXpress Ultra Cut Treatment Nanotechnology Repair (PC800)

Eliminates deep scratches, appearance defects and paint mist with Ultra Cut Treatment to bring back shine and radiance to your paint.

Daily use of your car or motorcycle increases the chances of deep scratches appearing, which is often unpleasant when your vehicle is new or regularly maintained. Thanks to its unique technology, our Ultra Cut will allow you to quickly and effortlessly remove scratches even deep present in the varnish layer.

Its formulation makes it possible to remove the sharp edges of the scratch, to polish them to reduce the angle of reflection of the light until the scratch is erased. Its excellent scratch removal qualities make it the ideal solution to revive your bodywork.


PadXpress 2-in-1 Polish

PadXpress Pads come with polish and polishing pad in one. Simply attach the PadXpress Pad to a polisher and off you go. No leaky polish, no stopping to dip your polishing pad into polish, no leaks and no mess, making polishing faster and easier! Ease and speed in one operation! Whether you are an individual or a professional, you will appreciate the disconcerting ease with the unique 2-in-1 application.

Compatible with all polishing machine backing plates.



Your body or fairing should be clean and dry. Shake the product well before use. Check that the backing plate of your polisher is 125mm for a car and 80mm for a motorcycle. 

  1. Position the pad on the polisher.
  2. Place the foam on the part of the bodywork or fairing to be polished.
  3. Apply vertical pressure on the foam (short pulse) to release the product from its reservoir.
  4. Work with regular cross movements (from left to right and up and down) at 1200 rpm maximum, while maintaining.  light pressure on the foam for a good contact on the support, but without forcing.
  5. Work in areas of approximately 1m². Once this area has been treated, pass your micro-fiber towel over the area to wipe off the excess. 
  6. Repeat the operation as many times as necessary, depending on the surface to be treated. 
  7. Once the application of the ultra cut is complete, it is strongly recommended to apply the PADXPRESS paint Regenerator, followed by PADXPRESS Ceramic Treatment Polish 550.

80 grams

Store in a dry place away from light and to use it within 12 months after opening.